QUIK-R
Wall Insulation/Substrate and Water Drainage System for Exterior Insulation and Finish Systems (EIFS) - Installing QUIK-R™ Insulation
QUIK-R™ is a rigid polyisocyanurate foam core insulation faced with special coated glass fiber facers. Designed for use in EIFS applications.
| Nominal Board Thickness** |
R-Value†,1 |
Board Size |
Edge Treatment |
Min Compressive Strength†† |
| 0.59" |
3.0 |
4' x 8'/4' x 9'/4' x 10'/4' x 12' |
Square Edge |
20 psi |
| 0.75" |
4.0 |
4' x 8'/4' x 9'/4' x 10'/4' x 12' |
Square Edge |
20 psi |
| 1.0" |
5.0 |
4' x 8'/4' x 9'/4' x 10'/4' x 12' |
Square Edge |
20 psi |
Building Code Compliance
Complies with ASTM C 1289, Type II, Class 2. Meets IBC/IRC requirements for foam plastic insulation. See NES NER 554.
**Not all product sizes are available in all regions.
†R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft2•h•°F/Btu.
†† Vertical compressive strength is measured at 10% deformation or at yield, whichever occurs first.
1 R-value determined by ASTM C518
Use QUIK-R in mechanically attached systems only, and install according to manufacturer's installation instructions.
Not available in all areas. Available in the East and in Colorado and New Mexico.
