Applications Products Resources and Tools Energy Savings Center Literature  

Frost-Protected Shallow Foundations

Frost-Protected Shallow Foundations

Building Codes require extending foundations below the frost line to prevent frost-heaving of the foundations. This requires a lot of excavation and concrete, which can be very costly and time-consuming. Frost-protected shallow foundations enable you to meet code without extending the foundation below the frost-line, saving time and money. STYROFOAM™ extruded polystyrene insulation is ideally suited for this application due its excellent moisture resistance, freeze-thaw stability, compressive strength, foundation modulus and creep properties.

There is a STYROFOAM insulation solution that is right for every Frost-Protected Shallow Foundation application:

My project or needs are: Recommended Product Solution Installation Instructions/Considerations Building Code Compliance
Protect foundation from frost-heaving without extending foundation below frost-line. STYROFOAM SCOREBOARD™ See ASCE Design & Construction of frost-protected shallow foundations. International Residential Code section R403.3

For more information visit http://www.nahb.org/.
Complies with ASTM C 578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ICBO-ES ER 2257, BOCA-ES RR 21-02, NES NER 699, Und. Lab. Inc.® Classified, see Classification Certificate D369.
STYROFOAM Square Edge See ASCE Design & Construction of frost-protected shallow foundations. International Residential Code section R403.3

For more information visit http://www.nahb.org/.
Complies with ASTM C578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ICBO-ES ER 2257, BOCA-ES RR 21-02, NES NER 699, Und. Lab. Inc.® Classified, see Classification Certificate D369.
STYROFOAM Tongue & Groove See ASCE Design & Construction of frost-protected shallow foundations. International Residential Code section R403.3

For more information visit http://www.nahb.org/.
Complies with ASTM C 578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ICBO-ES ER 2257, BOCA-ES RR 21-02, NES NER 699, Und. Lab. Inc.® Classified, see Classification Certificate D369.