Approved Veneers
Based on extensive third-party testing, the following veneers are approved for use with the THERMAXâ„¢ Wall System:
 
Click for enhanced image |
Brick (clay)
- Standard nominal 4" thick
- Standard anchors installed max, 24" o.c. vertically on each studÂ
|
 
Click for enhanced image |
3-Coat Stucco
- Minimum 3/4" exterior cement plaster and lath
- Secondary water-resistive barrier between exterior insulation and lath (not full-coverage asphalt or butyl-based self-adhered membrane)
|
|
Limestone
- Minimum 2" thick
- Maximum 2" drainage space
|
|
Metal Composite Metal (MCM)
- Any NFPA 285 approved MCM system per manufacturer testing
|
 
|
TerraCotta Cladding
- Standard terracotta system (min 1-1.25" thick)
- Any standard installation technique
|
 
Click for enhanced image |
Cement Board Siding
- Noncombustible siding per ASTM E136
- Any standard installation technique
|
 
Click for enhanced image |
Metal Panel
- Steel, aluminum or copper material
- Any standard installation technique
|
Ready to make your mark? We'll do our level best to answer your questions.
