STYROFOAM™ Brand Z-MATE™ Insulation fits between Z-furring channels placed on 24" centers, which saves installation time by eliminating cutting or snapping of insulation boards. The Type X extruded polystyrene foam insulation is designed specifically for use beneath drywall in interior masonry wall applications.
Building Code Compliance
Complies with ASTM C578 Type X. Meets IBC/IRC requirements for foam plastic insulation. See ESR-2142, BOCA-ES RR 21-02. UL Classified, see Classification Certificate D369.
STYROFOAM™ Brand Z-MATE™ Insulation CAD Details
Related Information
STYROFOAM™ Z-MATE™ Extruded Polystyrene Insulation Product Information (137KB PDF)
STYROFOAM™ Extruded Polystyrene Foam Insulation – 50 Year Thermal Limited Warranty (206KB PDF)
STYROFOAM™ Brand Z-MATE™ Insulation is manufactured to fit between Z-furring channels placed on 24" centers, saving installation time.
| Nominal Board Thickness(1), in | R-Value(2) | Board Size, ft | Edge Treatment | Min Compressive Strength(3), psi |
| 1.5 | 7.5 | 23.875 x 96 | Square Edge | 15 |
| 2.0 | 10.0 | 23.875 x 96 | Squaare Edge | 15 |
|
(1) Not all product sizes are available in all regions. (2) R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft2• h•°F/Btu. R-value determined by ASTM C518. (3) Vertical compressive strength is measured at 10% deformation (5% for STYROFOAM™ Brand PLAZAMATE™ Insulation and for STYROFOAM™ Brand HIGHLOAD 40, 60 and 100 Insulation products) or at yield, whichever occurs first. Since STYROFOAM™ Brand Extruded Polystyrene and Dow polyisocyanurate insulation products are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep. For static loads, 3:1 is suggested. For dynamic loads, 5:1 is suggested. |
||||
07 20 00 Board Insulation
09 22 00 Insulation for Metal Supports with Gypsum Board
We're here to help. If you're not finding the information you need, please let us know.