STYROFOAM™ Brand FREEZERMATE™ Insulation is specially designed for use as subfloor thermal insulation in low temperature applications. The Type IV extruded polystyrene foam insulation
Building Code Compliance
Complies with ASTM C578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ESR-2142, BOCA-ES RR 21-02, ICBO-ES ER-2257. UL Classified, see Classification Certificate D369.
STYROFOAM™ FREEZERMATE™ Extruded Polystyrene Insulation Product Information (81KB PDF)
STYROFOAM™ Extruded Polystyrene Foam Insulation – 50 Year Thermal Limited Warranty (206KB PDF)
STYROFOAM™ Extruded Polystyrene Foam Insulation – 30 Year Thermal Limited Warranty (202KB PDF)
STYROFOAM™ Brand FREEZERMATE™ Insulation is specially designed for use as subfloor thermal insulation in low temperature applications, as well as most static and dynamic loading floor applications.
|Nominal Board Thickness(1), in||R-Value(2)||Board Size, ft||Edge Treatment||Min Compressive Strength(3), psi|
|2.0||10.0||2 x 8 / 4 x 8||Square Edge||30|
|3.0||15.0||2 x 8 / 4 x 8||Square Edge||30|
(1) Not all product sizes are available in all regions.
(2) R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft2• h•°F/Btu. R-value determined by ASTM C518.
(3) Vertical compressive strength is measured at 10% deformation (5% for STYROFOAM™ Brand PLAZAMATE™ Insulation and for STYROFOAM™ Brand HIGHLOAD™ 40, 60 and 100 Insulation products) or at yield, whichever occurs first. Since STYROFOAM™ Brand Extruded Polystyrene and Dow polyisocyanurate insulation products are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep. For static loads, 3:1 is suggested. For dynamic loads, 5:1 is suggested.
07 20 00 Board Insulation
We're here to help. If you're not finding the information you need, please let us know.