STYROFOAMâ„¢ Brand CLADMATEâ„¢ XLÂ Insulation in a convenient larger, size, helps reduce thermal bridging in walls and attics of new and retrofit construction. The versatile, thermally efficient extruded polystyrene foam insulation board is available in a variety of thicknesses.
Building Code Compliance
CAN/ULC S701-97 Type 2, CCMC 12084-L, ASTM C578 Type X. Meets 1995 National Building Code air permeance properties; suitable for use as an air barrier material.
Related Information
Add Value With STYROFOAM™ Insulation Solutions (219KB PDF)
Ajouter de la valeur grâce aux Solutions Isolantes STYROFOAM™ (258KB PDF)
Better Homes, Better Walls: Meet Ontario code Changes with STYROFOAMâ„¢ CLADMATEâ„¢ (388KB PDF)
STYROFOAMâ„¢ CLADMATEâ„¢ Extruded Polystyrene Insulation Product Information (124KB PDF)
Welcome Home to a New Standard: Save Money and Meet Ontario's Building Code with STYROFOAM™ CLADMATE™ (380KB PDF)
Installation Instructions for STYROFOAM™ CLADMATE™/CLADMATE™ XL, STYROFOAM™ WALLMATE™ and STYROFOAM™ SM – Finished and Unfinished Attics
Installing SM/CLADMATEâ„¢/WALLMATEâ„¢ in Cathedral/Vaulted Ceiling (Gypsum Board Exposed Inside Ceiling w/STYROFOAMâ„¢ Between Gypsum and Wood Framing)
Installing SM/CLADMATEâ„¢/WALLMATEâ„¢ in Cathedral/Vaulted Ceiling (Exposed Beams Inside Ceiling w/STYROFOAMâ„¢ on top of Exposed Tongue & Groove Decking)
Installing STYROFOAMâ„¢ SM, STYROFOAMâ„¢ CLADMATEâ„¢/CLADMATEâ„¢ XL in Heated Crawlspaces
Installing STYROFOAM™ CLADMATE™/CLADMATE™ XL or STYROFOAM™ SM – Interior of Basement Wall with Stud Wall Framing and Batt Insulation
Installing STYROFOAM™ CLADMATE™/CLADMATE™ XL – Existing Fram Wall Residing/Retrofit
Installing STYROFOAM™ CLADMATE™/CLADMATE™ XL – Exterior Wall – Foam Over OSB or Non-Insulated Exterior Sheathing (New Construction)
STYROFOAMâ„¢ Brand CLADMATEâ„¢ XL Insulation, in a convenient larger size, helps reduce thermal bridging in walls and attics of new and retrofit construction.
| Nominal Board Thickness(1), in (mm) | R-Value(2) (RSI) | Board Size, ft (mm) | Edge Treatment | Min Compressive Strength(3), psi (kPa) |
| 1.0 (25) | 5.0 (0.88) | 4 x 8 (1200 x 2400) | Shiplap | 16 (110) |
| 1.5 (38) | 7.5 (1.32) | 4 x 8 (1200 x 2400) | Shiplap | 16 (110) |
| 2.0 (50) | 10.0 (1.76) | 4 x 8 (1200 x 2400) | Shiplap | 16 (110) |
|
(1) Not all product sizes are available in all regions. (2) R means resistance to heat flow. The higher the R-value or RSI (R-Value Système Internationale), the greater the insulating power. R-values are expressed in ft2• h•°F/Btu. RSI values are expressed in m2°C/W. R-value determined by ASTM C518 as per CAN/ULC S701-97(supersedes CAN/CGSB 51.20-M87). (3) Vertical compressive strength is measured at 10% deformation (5% for STYROFOAM™ Brand HIGHLOAD 40, 60 and 100 Insulation products) or at yield, whichever occurs first. Since STYROFOAM™ Brand Extruded Polystyrene Insulation products are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep. For static loads, 3:1 is suggested. For dynamic loads, 5:1 is suggested. |
||||
07 20 00 Board Insulation
07 21 13 Board Insulation (Wall Sheathing)
We're here to help. If you're not finding the information you need, please let us know.
