Attack the Attic
What’s hiding in your attic could be very frightening. Not the critters or junk… but the potential for energy loss through an uninsulated or under-insulated attic.
Insulating and sealing the attic with high-quality solutions from Dow is one of the most cost-effective ways to minimize heat loss and gain through the roof. So less energy is required to heat or cool the home, reducing costs and greenhouse gas emissions.
Whether used as an unoccupied storage area or additional living space, a well-insulated and sealed attic helps:
- Save money and energy
- Increase comfort
- Provide even temperature distribution throughout the home
- Prevent condensation
- Reduce mold, mildew, wood rot and odor
U.S.
| Project Specifications |
Recommended Dow Solutions |
- Add or enhance usable living space with rigid foam insulation
- Control mold, mildew, odors and wood rot
- Eliminate thermal shorts and heat loss through ceiling and walls
- Reduce potential for ice dams, water backups and leakage
- Improve comfort and energy efficiency
|
- Dow’s strongest XPS sheathing
- Reinforced plastic film facers on both sides
- Square edge
- 1/2" thickness
- 15 psi
|
STYROFOAM™ Brand DURAMATE™ Plus Insulation
|
- Film facers on both sides
- Square edge and tongue and groove options
- 1/2"-1" thicknesses
- 15 psi
|
STYROFOAM™ Brand Residential Sheathing
|
- Square edges on all four sides
- 3/4"-4" thicknesses
- Two board size options
- 25 psi
|
STYROFOAM™ Brand Square Edge Insulation
|
- Interlocking fit
- 3/4"-2" thicknesses
- Three board size options
- 25 psi
|
STYROFOAM™ Brand Tongue and Groove Insulation
|
- Three-ply poly/aluminum facers for exceptional strength and durability
- 1/2"-1" thicknesses
- Two board size options
- 25 psi
|
Super TUFF-R™ Insulation
|
- Glass-fiber-reinforced polyisocyanurate foam core for fire resistance
- Aluminum foil facers
- 1/2"-2" thicknesses
- Three board size options
- 25 psi
|
THERMAX™ Sheathing
|
- Radiant barrier-quality aluminum foil facers
- 1/2"-1" thicknesses
- Two board size options
- 25 psi
|
TUFF-R™ Insulation
|
|
Enhanced Installation
|
|
- Insulate existing, occupied attic room with rigid foam insulation
- Control mold, mildew, odors and wood rot
- Eliminate thermal shorts and heat loss through ceiling and walls
- Reduce potential for ice dams, water backups and leakage
- Improve comfort and energy efficiency
|
- Square edges on all four sides
- 3/4"-4" thicknesses
- Two board size options
- 25 psi
|
STYROFOAM™ Brand Square Edge Insulation
|
- Interlocking fit
- 3/4"-2" thicknesses
- Three board size options
- 25 psi
|
STYROFOAM™ Brand Tongue and Groove Insulation
|
|
Enhanced Installation
|
|
- Insulate unoccupied attic storage space with rigid foam insulation
- Control mold, mildew, odors and wood rot
- Eliminate thermal shorts and heat loss through ceiling and walls
- Reduce potential for ice dams, water backups and leakage
- Improve temperature stability
- Improve energy efficiency
|
- Glass-fiber-reinforced polyisocyanurate foam core for fire resistance
- Aluminum foil facers
- 1/2"-2" thicknesses
- Three board size options
- 25 psi
|
THERMAX™ Sheathing
|
|
Enhanced Installation
|
|
- Protect against air infiltration throughout attic/ceiling
- Seal out moisture, dust, smoke, outside noise and insects
- Enhance insulation performance
- Portable two-component polyurethane foam sealant
|
- Chemically cured, high-yield polyurethane foam
- One-step application
|
FROTH-PAK™ Foam Sealant
|
|
Enhanced Installation
|
|
- Insulate around attic perimeter/penetration/ductwork before adding fiberglass batt or blown-in insulation
- Protect against air infiltration throughout attic/ceiling
- Seal out moisture, dust, smoke, outside noise and insects
- Enhance insulation performance
- Portable two-component polyurethane foam sealant
|
- Class A (flame spread index of 25 or less) – check with local code official for approval
- Chemically cured, high-yield polyurethane foam
- One-step application
|
FROTH-PAK™ FS Foam Insulation
|
- Seamless, monolithic barrier for protection against water and air
- Insulation and air barrier in one
- FM and UL approved system
- Professional spray foam installation
|
- Continuous insulation coverage
- Expands to seal and insulation cavities, cracks and crevices, when properly applied
- Will not compress, settle, shrink or sag
- Adds strength and rigidity to the wall assembly(1)
|
STYROFOAM™ Brand SPF Insulation – RS
|
|
(1) National Association of Home Builders, Testing and Adoption of Spray Polyurethane Insulation for Wood Frame Building Construction, May 25, 1992
|
|
|
Enhanced Installation
|
|
(1) Consult the label and Material Safety Data Sheet carefully before use.
Canada
| Project Specifications |
Recommended Dow Solutions |
- Add or enhance usable living space with rigid foam insulation
- Control mold, mildew, odors and wood rot
- Eliminate thermal shorts and heat loss through ceiling and walls
- Reduce potential for ice dams, water backups and leakage
- Improve comfort and energy efficiency
|
- 2' x 8' (600 mm x 2400 mm) boards
- 1/2"-1-1/2" (13 mm-38 mm) thicknesses
- Butt edge and shiplap edge options
- 16 psi (110 kPa)
|
STYROFOAM™ Brand CLADMATE™ Insulation
|
- Convenient larger 4' x 9' (1200 mm x 2700 mm) boards
- 1"-2" (25 mm-50 mm) thicknesses
- Shiplap edge
- 16 psi (110 kPa)
|
STYROFOAM™ Brand CLADMATE™ XL Insulation
|
- 2' x 8' (600 mm x 2400 mm) boards
- 1"-4" thicknesses
- Butt edge and shiplap edge options
- 30 psi (210 kPa)
|
STYROFOAM™ Brand SM Insulation
|
- Slotted board edges accommodate nailing strip for ease of attachment
- 2' x 8' (600 mm x 2400 mm) boards
- 1.5"-2.4" (38 mm-60 mm) thicknesses
- 16 psi (110 kPa)
|
STYROFOAM™ Brand WALLMATE™ Insulation
|
|
Enhanced Installation
|
|
- Insulate existing, occupied attic room with rigid foam insulation
- Control mold, mildew, odors and wood rot
- Eliminate thermal shorts and heat loss through ceiling and walls
- Reduce potential for ice dams, water backups and leakage
- Improve comfort and energy efficiency
|
- 2' x 8' (600 mm x 2400 mm) boards
- 1/2"-1-1/2" (13 mm-38 mm) thicknesses
- Butt edge and shiplap edge options
- 16 psi (110 kPa)
|
STYROFOAM™ Brand CLADMATE™ Insulation
|
- Convenient larger 4' x 9' (1200 mm x 2700 mm) boards
- 1"-2" (25 mm-50 mm) thicknesses
- Shiplap edge
- 16 psi (110 kPa)
|
STYROFOAM™ Brand CLADMATE™ XL Insulation
|
- 2' x 8' (600 mm x 2400 mm) boards
- 1"-4" thicknesses
- Butt edge and shiplap edge options
- 30 psi (210 kPa)
|
STYROFOAM™ Brand SM Insulation
|
- Slotted board edges accommodate nailing strip for ease of attachment
- 2' x 8' (600 mm x 2400 mm) boards
- 1.5"-2.4" (38 mm-60 mm) thicknesses
- 16 psi (110 kPa)
|
STYROFOAM™ Brand WALLMATE™ Insulation
|
|
Enhanced Installation
|
|
- Insulate unoccupied attic storage space with rigid foam insulation
- Control mold, mildew, odors and wood rot
- Eliminate thermal shorts and heat loss through ceiling and walls
- Reduce potential for ice dams, water backups and leakage
- Improve temperature stability
- Improve energy efficiency
|
- 2' x 8' (600 mm x 2400 mm) boards
- 1/2"-1-1/2" (13 mm-38 mm) thicknesses
- Butt edge and shiplap edge options
- 16 psi (110 kPa)
|
STYROFOAM™ Brand CLADMATE™ Insulation
|
- Convenient larger 4' x 9' (1200 mm x 2700 mm) boards
- 1"-2" (25 mm-50 mm) thicknesses
- Shiplap edge
- 16 psi (110 kPa)
|
STYROFOAM™ Brand CLADMATE™ XL Insulation
|
- 2' x 8' (600 mm x 2400 mm) boards
- 1"-4" thicknesses
- Butt edge and shiplap edge options
- 30 psi (210 kPa)
|
STYROFOAM™ Brand SM Insulation
|
- Slotted board edges accommodate nailing strip for ease of attachment
- 2' x 8' (600 mm x 2400 mm) boards
- 1.5"-2.4" (38 mm-60 mm) thicknesses
- 16 psi (110 kPa)
|
STYROFOAM™ Brand WALLMATE™ Insulation
|
|
Enhanced Installation
|
|
- Protect against air infiltration throughout attic/ceiling
- Seal out moisture, dust, smoke, outside noise and insects
- Enhance insulation performance
- Portable two-component polyurethane foam sealant
|
- Chemically cured, high-yield polyurethane foam
- One-step application
|
FROTH-PAK™ Foam Sealant
|
|
Enhanced Installation
|
|
|
|
Enhanced Installation
|
|
(1) Consult the label and Material Safety Data Sheet carefully before use.
What’s up? If you’re not finding the roof and ceiling information you need, please let us know.
