FLOORMATE 500-A
FLOORMATE™ 500-A is manufactured in the UK using technology that takes CO2 from industry and uses it as a blowing agent in order to create blue extruded polystyrene foam with a Global Warming Potential (GWP) of less than five. The product is designed for high load bearing floors.
Further information on designing with FLOORMATE insulation can be found at Insulating with STYROFOAM: Insulating Floors.
Safety Data Sheets
|
|
|
|
FLOORMATE 500-A |
| Properties |
Standard |
Unit |
CE Code |
|
| Thermal conductivity* |
|
|
|
|
| ≤80mm |
BS EN 12667 |
W/mK |
λD |
0.036 (</=70mm) |
| 81-120mm |
BS EN 12667 |
W/mK |
λD |
0.038 (> 71mm) |
| >120mm |
BS EN 12667 |
W/mK |
λD |
– |
| Compressive strength at 10% or break (90 days) |
BS EN 826 |
kN/m2 |
CS(10Y)i |
500 |
| Design load 2% maximum deflection (50 years) |
BS EN 1606 |
kN/m2 |
CC(2/1.5/50)σc |
180 |
| Water vapour resistivity |
BS EN 12086 |
MNs/gm |
– |
900 |
| Water vapour diffusion resistance factor |
BS EN 12086 |
m |
MUi |
180 |
| Water absorption |
|
|
|
|
| Total immersion |
BS EN 12087 |
% vol |
WL(T)i |
<0.4 |
| Diffusion |
BS EN 12088 |
% vol |
WL(V)i |
<3 |
| Freeze/thaw, after 300 cycles |
BS EN12091 |
% vol |
FTi |
<1 |
| Dimensional stability |
|
|
|
|
| 48hrs at 70C/90%RH |
BS EN 1604 |
% |
DS(TH) |
<2 |
| 168hrs at 40kPa/70C |
BS EN 1605 |
% |
DLT(2)5 |
<5 |
| Density (aim) |
BS EN 1602 |
kg/m3 |
– |
40 |
| Dimensions |
|
|
|
|
| Length |
BS EN 822 |
mm |
– |
1250 |
| Width |
BS EN 822 |
mm |
– |
600 |
| Thickness |
BS EN 823 |
mm |
Ti |
50,80,120 |
| Fire classification – reaction to fire |
BS EN 13164
BS EN 13501 |
– |
Euroclass |
E |
| Appearance |
|
|
|
|
| Surface |
|
|
|
skin |
| Edge profile |
|
|
|
shiplap |
| Application |
|
|
|
Floors – high load bearing |
| Certification |
BBA Agrément |
|
|
Applied for |
The properties given are typical (unless stated otherwise). Results of tests described are available from Dow
* declared 90/90 value - BS EN 13164
