FLOORMATE 200-X
FLOORMATE™ 200-X, part of the FLOORMATE product range, is manufactured in accordance with BS 13164:2001 and is for use under and over ground-supported and suspended domestic concrete floors. It may also be used on intermediate concrete or timber floors. FLOORMATE 200-X is rot proof, dimensionally stable and when installed to BBA Certificate 92/2782 will remain an effective insulating material for the life of the building into which it is incorporated.
Further information on designing with FLOORMATE insulation can be found at Insulating with STYROFOAM: Insulating Floors.
Safety Data Sheets
|
|
|
|
FLOORMATE 200-X |
| Properties |
Standard |
Unit |
CE Code |
|
| Thermal conductivity* |
|
|
|
|
| ≤80mm |
BS EN 12667 |
W/mK |
λD |
0.029 |
| 81-120mm |
BS EN 12667 |
W/mK |
λD |
0.029 |
| >120mm |
BS EN 12667 |
W/mK |
λD |
0.031 |
| Compressive strength at 10% or break (90 days) |
BS EN 826 |
kN/m2 |
CS(10Y)i |
200 |
| Design load 2% maximum deflection (50 years) |
BS EN 1606 |
kN/m2 |
CC(2/1.5/50)σc |
60 |
| Water vapour resistivity |
BS EN 12086 |
MNs/gm |
– |
825 |
| Water vapour diffusion resistance factor |
BS EN 12086 |
m |
MUi |
165 |
| Water absorption |
|
|
|
|
| Total immersion |
BS EN 12087 |
% vol |
WL(T)i |
<0.5 |
| Diffusion |
BS EN 12088 |
% vol |
WL(V)i |
– |
| Freeze/thaw, after 300 cycles |
BS EN12091 |
% vol |
FTi |
– |
| Dimensional stability |
|
|
|
|
| 48hrs at 70C/90%RH |
BS EN 1604 |
% |
DS(TH) |
<2 |
| 168hrs at 40kPa/70C |
BS EN 1605 |
% |
DLT(2)5 |
- |
| Density (aim) |
BS EN 1602 |
kg/m3 |
– |
38 |
| Dimensions |
|
|
|
|
| Length |
BS EN 822 |
mm |
– |
2500 |
| Width |
BS EN 822 |
mm |
– |
600 |
| Thickness |
BS EN 823 |
mm |
Ti |
50, 60, 70, 80, 90, 100 |
| Fire classification – reaction to fire |
BS EN 13164
BS EN 13501 |
– |
Euroclass |
E |
| Appearance |
|
|
|
|
| Surface |
|
|
|
skin |
| Edge profile |
|
|
|
butt edge |
| Application |
|
|
|
Floors – domestic |
| Certification |
BBA Agrément |
|
|
92/2782 |
The properties given are typical (unless stated otherwise). Results of tests described are available from Dow
* declared 90/90 value - BS EN 13164
