|
FLOORMATE 200
| FLOORMATE Brand Insulation is an ideal heavy load-bearing material for most kind of floors, including those found in warehouses, parking areas, and residential and commercial buildings. It can be installed under or over the slab in ground bearing concrete floors and is suitable for use on suspended beam and block or timber floors. |
| |
| Board Size(length x width, mm) |
1200 x 600 |
| Thickness (mm) |
25, 30, 35, 50 |
| Edge Treatment |
Butt edge |
| Surface |
Skin |
|
|
|
|
| |
| PROPERTIES |
STANDARD |
UNIT |
FLOORMATE 200 |
| Density (minimum) |
BS4370: Method 2 |
kg/m3 |
25 |
| Thermal conductivity (90 days, 10°C) |
BS3837: Part 2: 1990 Appendix G |
W/mk |
0.028 |
| Compressive strength at 10% deflection |
BS4370: Method 3 |
kN/m2 |
200 |
| Design load for traffic |
— |
kN/m2 |
60 |
| Water vapour permeability (δ) |
BS3837: Part 2: 1990 Appendix D |
ngm/Ns |
1.6 |
| Water absorption |
BS3837: Part 2: 1990 Appendix E |
% - vol. |
0.3 |
| Size: Length |
— |
mm |
1200 |
| Width |
— |
mm |
600 |
| Temperature limits |
— |
°C |
-50/+75 |
| Thickness(1) |
— |
mm |
25, 30, 35, 50 |
| Edge profile |
— |
— |
butt edge |
| Surface |
— |
— |
skin |
|
|
| (1)Special dimensions are available upon request. |
| |
| Back to Applications & Products |
|
|
